What the EST-FP 30W is built to do
The EST-FP 30W is a portable / desktop marking in the laser marking machines range. A 30 W desktop galvo marker for faster, deeper jewelry marking.
Marking with a fiber source is a thermal, contactless process: the beam alters the metal surface rather than cutting into it with a tool, so there is no tool wear and no mechanical load on thin shanks, bezels or findings. On this model the beam runs at 1064 nm and scans at up to ≤ 7000 mm/s.
Power is the variable that decides depth per pass, not mark quality — accuracy and speed are shared across the range. That is why a 30 W machine is specified by the job: identification marking, deep engraving, or engraving plus light cutting. The complete guide to laser marking for jewelry works through those thresholds in detail.
Capability in practice
The figures below are the ones that decide whether this machine suits a given job. The full table is in the specifications section above.
| Parameter | EST-FP 30W | What it decides |
|---|---|---|
| Laser power | 30 W | Surface identification marking — hallmarks, karat stamps, batch and QR codes. |
| Marking speed | ≤ 7000 mm/s | Ceiling figure; real throughput depends on fill spacing and depth. |
| Repeat accuracy | ≤ 0.01 mm | Positional repeatability between passes — what keeps small text legible. |
| Marking field | 110×110 / 150×150 mm | Larger fields trade a little edge sharpness for coverage per load. |
| Pulse frequency | 30–60 kHz | Higher rates suit continuous inline work; lower rates suit deeper single welds. |
| Cooling | Air | Determines duty cycle and whether a separate chiller is needed on site. |
| Software | PC + Mobile | Accepts the usual vector and raster artwork for logos, text and codes. |
Where it fits in a workshop
Marking is usually the last operation before packing, so the machine sits at the end of the bench line where finished pieces are inspected. Typical work: hallmarks and karat stamps, serial numbers for traceability, customer personalisation, and brand logos on tags and clasps.
- Logo marking — brand marks on clasps, findings and packaging inserts.
- Ring marking — inside-band hallmarks, sizes and personal engraving.
Installation and site requirements
Most delayed commissionings come down to three things: the supply, the cooling and the route into the room. Check these against the site before the machine ships.
- Power draw — ≤ 0.55 kW·h. Size the circuit for continuous, not peak, operation.
- Cooling — Air. No separate chiller position is required.
- Options to decide at order — Rotary / fixture. These are far cheaper to fit now than to retrofit later.
Operator handover covers the software, the parameter set for the specific alloy and wire in use, and the first production run. If any of the figures above sit close to your limits, say so on the quotation request and we will confirm before the order is placed.
How the EST-FP 30W compares
Other portable / desktop marking models in the range, so you can see where this one sits rather than reading its specification in isolation.
| Model | Power | Wire / field | Cooling | Weight |
|---|---|---|---|---|
| EST-FP 30W this page | 30 W | 110×110 / 150×150 mm | Air | — |
| EST-F1 (2W Fiber) | 2 W | 70×70 mm | — | 5.9 kg |
| EST-F1 (10W Diode) | 10 W | 70×70 mm | — | 5.9 kg |
| EST-FP 20W | 20 W | 110×110 / 150×150 mm | Air | — |
Overview
The EST-FP 30W is a portable / desktop marking built for deep engraving in jewelry manufacturing, supplied by Sawyers Jewelry. A 30 W desktop galvo marker for faster, deeper jewelry marking. It is designed for reliable daily production with consistent, repeatable results.
Key Capabilities
- Laser power: 30 W (Fiber, ZBTK-GALVO)
- Marking area: 110×110 / 150×150 mm
- Marking speed: ≤ 7000 mm/s
- Cooling: Air
Typical Applications
The EST-FP 30W is well suited to logo & serial-number marking and ring & band engraving. Settings can be adapted to your metal mix and output requirements.
Ordering & Support
Sawyers Jewelry supplies the EST-FP 30W with options for voltage and tooling, plus export documentation and after-sales support. Use the inquiry form on this page for a tailored quotation.